380V Electric Linear Actuator Raco-Elektrozylinder Electric Putter Push Rod Pusher

Basic Info

Model NO.	DTI/1000/1000/H85
Voltage	380V
Standard Stroke	400mm
Max Thrust	1000N
Phase	3
Motor	380V
Power	7.5kw
Thrust	1000kn
Stoke	100
Transport Package	Wooden Case
Specification	200*96*105 (cm)
Trademark	X-ing
Origin	China
HS Code	8
Production Capacity	1000

Packaging & Delivery

Package size per unit product 1.00cm * 1.00cm * 1.00cm Gross weight per unit product 75.000kg

Product Description

Technical parameters:

model	thrust	speed	push distance	motor model
700	1000	H85	110	Y90L-4

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needsreciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overloadprotection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenientinstallation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead ofhydraulic, pneumatic devices, can be operated separately on-site and centralized control.Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail inthe guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.DT type electric linear actuator Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurateaction, reliable performance, and has built-in overload protection of the mechanical rotation device. In a verywide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by theuser.To facilitate automatic control or to achieve a special trajectory, according to user requirements, can beconfigured DC, frequency, step, speed and other special motor to meet the total control requirements.Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processingand other departments. Technical specification:

NO.	Type	Trust(kg)	Route(mm)	Speed(mm/s)	Motor		380(V)		Le(mm)		contour dimension(L*W*H)mm	weight(kg)
					Type	Power(w)	Revolution(T/Min)	Electricity(A)	LeMin	LeMax
1	25-20-I	25	200	48	AO25024	40	1400	0.23	369	569	580*125*118	7.5
2	25-20-II	25	200	96	AO25022	60	2800	0.23	369	569	580*125*118	7.5
3	100-40-I	100	400	42	AO5624	120	1400	0.47	640	1040	858*152*206	23
4	100-40-II	100	400	84	AO5622	180	2800	0.52	640	1040	858*152*206	23
5	300-50-I	300	500	42	AO6334	370	1400	1.12	745	1245	998*170*226	35
6	300-50-II	300	500	84	AO6332	550	2800	1.38	745	1245	998*170*226	35
7	500-50-I	500	500	50	AO7134	750	1400	2.02	778	1278	1098*190*226.5	52
8	500-50-II	500	500	100	AO7132	1100	2800	2.6	778	1278	1098*190*226.5	52
9	700-60-I	700	600	50	AO7134	750	1400	2.02	803	1343	1193*200*279	63
10	700-60-II	700	600	100	AO7132	1100	2800	2.6	803	1343	1193*200*279	63
11	1000-60-I	1000	600	50	JO2-21-4	1100	1400	2.68	883	1483	1260*204*271	75
12	1000-60-II	1000	600	100	JO2-21-2	1500	2860	3.24	883	1483	1260*204*271	75
13	1600-80-I	1600	800	50	JO2-31-4	2200	1400	4.9	1063	1863	1535*302*330	90
14	1600-80-II	1600	800	100	JO2-31-2	3000	2860	8.06	1063	1863	1535*302*330	90

OUR WORKSHOP

OUR SALES TEAM

 

Our Service1.Design ServicesOur design team has experience in cardan shaft relating to product design and development. If you have anyneeds for your new product or wish to make further improvements, we are here to offer our support.2.Product Servicesraw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing→Fashioning →Cleaning→ Assembly→Packing→Shipping3.Samples ProcedureWe could develop the sample according to your requirement and amend the sample constantly to meet yourneed.4.Research & DevelopmentWe usually research the new needs of the market and develop the new model when there is new cars in themarket.5.Quality ControlEvery step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.6.CertificationShould your products require testing and certification to comply with international standards, we can arrangethis with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd'sRegister or the testing company of your choice.

Thanks for choosing X-ING as your reliable partner and pleasetrust both of us will create a brilliant future!